Can You Lay Artificial Grass Over Decking? Pros, Cons and What to Check First
Artificial grass can work over decking, but only if the boards are sound, dry and well fixed. A quick check now can save a soggy, uneven finish later.
Use this guide to weigh up the pros and cons, spot problem areas, and decide whether your deck is ready for a neat artificial lawn.
What You’ll Need
* Links marked with an asterisk are affiliate links to Amazon. We may earn a small commission if you buy through them at no extra cost to you.
Step-by-Step Guide
Step 1: Check the decking is solid
Walk over the whole deck and look for loose boards, raised nails, rot or flexing. Artificial grass will only look good if the base underneath is firm and even.
Step 2: Clean and dry the surface
Sweep off debris, scrub away moss or algae, and let the decking dry fully. Any trapped dirt or moisture can stop the grass sitting flat and may lead to smells or mould.
Step 3: Fix any uneven areas
Replace damaged boards, tighten screws and sand down high spots. Fill major gaps only if they will not interfere with drainage or create soft patches.
Step 4: Lay and test-fit the grass
Roll out the grass and leave it to settle in place. Trim it carefully so the edges meet neatly, and check that doors, steps and drains still work properly.
Step 5: Secure the edges
Use suitable outdoor fixing tape or adhesive at the edges and seams. Keep fixings neat so the grass stays put but can still drain and breathe.
- Choose a grass with drainage holes for outdoor use.
- Avoid trapping damp leaves or dirt beneath the roll.
- Allow for deck boards moving slightly in hot or cold weather.
- If the deck is badly rotten, repair it first rather than covering it up.
Use caution with knives and adhesives, and never cover unsafe decking. If boards are loose or rotten, repair the structure before adding anything on top.
Final Thoughts
Artificial grass can be a tidy solution over decking, but only when the base is clean, level and secure. A proper check first makes the finish last longer.
